IBM 7014 T00, Manual

Page: 112 / 196

Completing a parts inventory
Before beginning the rack installation, perform a parts inventory.
About this task
If you have not done so, complete a parts inventory before installing the unit in the rack:
Procedure
1. Locate the kitting report in an accessory box.
2. Ensure that you received all of the features that you ordered and all of the parts on the kitting report.
Results
If there are incorrect, missing, or damaged parts, contact:
• Your IBM reseller
• IBM support (see the Directory of worldwide contacts website (http://www.ibm.com/planetwide) at IBM
Directory of worldwide contacts - Country/region for contact information for your country
• IBM Rochester Manufacturing Automated Information Line at 1–800–300–8751 (United States only)
Rack safety notices
You need to read the rack safety notices before installing equipment.
About this task
Before installing a rack, rack features, or a system or expansion unit into a rack, read the following safety
information.
Attention: If you are installing equipment into a non-IBM rack, the rack must comply with the
Electronics Industries Association (EIA) 310D specifications. If you do not have a rail kit designed
for the equipment in the non-IBM rack, do not install the equipment into the rack as damage to the
equipment or personal injury could occur.
(R001 part 1 of 2):
DANGER: Observe the following precautions when working on or around your IT rack system:
• Heavy equipment–personal injury or equipment damage might result if mishandled.
• Always lower the leveling pads on the rack cabinet.
• Always install stabilizer brackets on the rack cabinet unless the earthquake option is to be
installed.
• To avoid hazardous conditions due to uneven mechanical loading, always install the heaviest
devices in the bottom of the rack cabinet. Always install servers and optional devices starting
from the bottom of the rack cabinet.
• Rack-mounted devices are not to be used as shelves or work spaces. Do not place objects on top
of rack-mounted devices. In addition, do not lean on rack mounted devices and do not use them
to stabilize your body position (for example, when working from a ladder).
• Each rack cabinet might have more than one power cord.
– For AC powered racks, be sure to disconnect all power cords in the rack cabinet when directed
to disconnect power during servicing.
98 Power Systems: Racks and rack features