IBM 4247 - Model 001 B/W Dot-matrix Printer, User Manual

Page: 78 / 454

If you specify Immediate Eject for Continuous Forms Eject Mode parameter
(default value) in the Printer Setup category, press Load/Eject to immediately
make the printer
not ready. The printer displays:
and advances the form so that you can tear off the form at the perforation and
remove it from the printer.
If you specify Delayed Eject for the Continuous Forms Eject Mode parameter in
the Printer Setup category, press Load/Eject to cause the printer to display:
and beep the alarm. When the end of the form is reached, the printer becomes
not ready, displays:
and advances the form so that you can tear off the form at the perforation and
remove it from the printer.
Pressing the key a second time moves the next form to be printed back to the
previous print position and makes the printer
ready.
Refer to “Continuous Forms Eject Mode” on page 10-12 for more information
on changing Continuous Forms Eject mode.
Ÿ Ejects forms
When the printer is in an end-of-forms condition, the printer displays:
Press Stop. You are now ready to load forms.
ðð3 FORMS EJECTED
PRESS LOAD
ð93 EJECT PENDING
ðð3 FORMS EJECTED
PRESS LOAD
ðð1 END OF FORMS
LOAD FORMS
2-14
001, 002 User’s Guide