IBM 4247 - Model 001 B/W Dot-matrix Printer, User Manual

Page: 206 / 454

Rear Automatic Forms Thickness (AFTA)
This parameter allows you to adjust the distance between the paper and the print
|
head for the rear paper path. Paper must be loaded for this adjustment to be
|
effective. This adjustment can be set to one of the following values:
-5 to +3 The printer automatically adjusts the distance between the
paper and the print head. Each adjustment corresponds to
0.03 mm (.0012 in.). (The default is 0, which corresponds to
a gap of 0.25 mm [.01 in.] from the paper.)
Fixed 1 to 8 Selects a fixed print head distance value from 1 to 8 in
increments of 0.5 (where each value equals approximately
0.05 mm [.002 in.]).
To change or check the Rear AFTA:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
5. Press Enter to display the current value.
6. Press Scroll
↑
or Scroll
↓
until the desired value for Rear AFTA is displayed.
7. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
8. Use Start or Return to exit the Menu. See “Exiting the Configuration Menu” on
page 3-4.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
Rear AFTA
11-6
001, 002 User’s Guide