IBM 4247 - Model 001 B/W Dot-matrix Printer, User Manual

Page: 423 / 454

Installing Cable Connectors on Coaxial Cable
If you purchase bulk coaxial cables, assemble them as follows. See the
illustrations following these instructions for dimensions and help in doing these
procedures. If you use connectors provided by a company other than IBM, use the
instructions provided by the manufacturer.
1. Be certain the connector kit has all the required parts. Check the
cross-sectional diagram for the location of the cable components.
C o a x i a l C a b l e
J a c k e t
W i r e S h i e l d
C o n d u c t o r
I n s u l a t i o n
P l u g B o d y
S e l f - C l a m p i n g S l e e v e
a n d C o n t a c t
N u t
C o a x i a l C o n n e c t o r
( I B M p a r t 1 8 3 6 4 4 4
f o r i n d o o r u s e ,
I B M p a r t 1 8 3 6 4 4 7
f o r o u t d o o r u s e )
2. Cut squarely through the jacket, shield, and insulation, exposing 9.5 mm
(0.38 in.) of the conductor. Slide the nut over the cable jacket.
N u t
9 . 5 m m ( 0 . 3 8 i n . )
Appendix B. Cable Specifications and Assembly of the Cables
B-3