IBM 4247 - Model 001 B/W Dot-matrix Printer, User Manual

Page: 341 / 454

Quick Reference
You can print information about the operator panel keys and the Configuration
Menu parameters you can set. Each key is shown with a corresponding description
to the right. Each parameter is also shown with the corresponding values you can
select printed to the right. It does not indicate the default values. See the
“Configuration Categories” in Chapter 3, “Checking and Changing Configuration
Parameter Values” for the default values or refer to the quick reference card
shipped with your printer. See Figure 18-1 on page 18-4 for a sample printout.
|
The information is printed in the currently selected display language and it matches
|
the method of attachment for your printer (twinaxial, coaxial, etcetera).
To begin the Quick Reference Test:
1. Press Test.
The printer displays
2. Press Enter or Start to begin the test. The Ready indicator goes on and
printing begins.
3. When the Quick Reference test is complete the Ready indicator goes off.
4. Press Cancel Print to make the printer ready or Return to make the printer not
ready (see “General Test Instructions” on page 18-2).
4247 OPERATOR PRINT TESTS
Quick Reference
Chapter 18. Using the Operator Print Tests
18-3