IBM 4247 - Model 001 B/W Dot-matrix Printer, User Manual

Page: 139 / 454

Printer Compatibility 1 (Carriage Return at MPP + 1)
You can set the printer to automatically execute a carriage return at one position
past the current Maximum Print Position value. You can set this value to:
Standard (Default) An automatic new line executes at MPP + 1, then a carriage
return executes. The next print position will be the first print
position of the next line.
Alternate No automatic new line executes. The carriage return
executes at MPP + 1. The next print position will be the first
print position of the current line.
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or Return.
Buffered data will be lost.
To change or check the carriage return at MPP + 1, follow these steps:
1. Press Menu.
2. Press Scroll
↑
or Scroll
↓
until the printer displays
3. Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
5. Press Enter.
6. Press Scroll
↑
or Scroll
↓
until the printer displays
7. Press Enter to display the current value.
8. Press Scroll
↑
or Scroll
↓
until the desired value for carriage return is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10. Use Start or Return to exit the Menu. See “Exiting the Configuration Menu” on
page 3-4.
CONFIGURATION MENU
Coax Configuration
Coax Configuration
Printer Compatibility
Printer Compatibility
1 (CR at MPP+1)
Chapter 8. Coaxial Configuration
8-15