IBM 4247 - Model 001 B/W Dot-matrix Printer Page 352 User Manual Download

Page: 352 / 454

Supplies

Ribbon cartridges and paper are the only supplies you need for your printer.

When you need a new ribbon cartridge, order IBM part number 1053685. Contact

your place of purchase, or call Lexmark at 1-800-438-2468 to order ribbons.

Forms Specifications for Continuous and Cut Sheet Forms

The 4247 Printer operates with continuous and cut-sheet forms. All forms should

be evaluated in the printer's functional environment for forms handling, print

registration, and print quality acceptability prior to use. The forms must meet the

following specifications:

Form Aspects

Paper Paths

Continuous Forms

Cut Sheet

Front Push

Push-Pull

Rear Pull

Rear Push

Manual Feed

Dimensions

Width

76.2-431.8 mm

3-17 in.

76.2-431.8 mm

3-17 in.

114.3-444.5 mm

4.5-17 in.

Length

76.2-609.6 mm

3-24 in.

76.2-609.6 mm

3-24 in.

101.6-609.6 mm

4-24 in. (note 8)

Single Part

Weight

55-150 g/m

15-40 lb.

55-80 g/m

15-21 lb.

50-120 g/m

13.3-32 lb.

Thickness

(minimum)

0.08 mm

0.003 in.

0.08 mm

0.003 in.

0.08 mm

0.003 in.

Multiple Part

Maximum parts

(Or Copies)

(1 + 7)

(1 + 3)

(1 + 7)

Overall Thickness

0.08-0.635 mm

0.003-0.025 in.

0.08-0.35 mm

0.003-0.014 in.

0.08-0.635 mm

0.003-0.025 in.

First sheet weight

55-150 g/m

15-40 lb.

55-80 g/m

15-21 lb.

55-150 g/m

15-40 lb.

Attached sheet

individual weight

45-75 g/m

12-20 lb.

45-75 g/m

12-20 lb.

45-75 g/m

12-20 lb.

Carbon paper

individual weight

14-35 g/m

4-9 lb.

14-35 g/m

4-9 lb.

14-35 g/m

4-9 lb.

Notes (see page 19-2)

1, 2, 3, 5, 6

1, 2, 3, 4

7, 8, 9

Notes:

Continuous Forms

1. Forms less than 152.4 mm (6 in.) in length or width should be tested for

satisfactory stacking and may require operator assistance.

2. For optimum performance, printing should be restricted to 6.4 mm (0.25 in.)

from all edges, holes, or folds on the forms.

3. Some multiple part forms (such as mailers, thick/heavy perforations) may have

problems when using the PARK function. Try the forms first. If you do have

problems parking them, work the forms supplier to minimize damage.

19-2

001, 002 User’s Guide

Summary of Contents for 4247 - Model 001 B/W Dot-matrix Printer







































































































































































































































































































































































































































































Search results

Summary of Contents for 4247 - Model 001 B/W Dot-matrix Printer

Reviews:

Related manuals for 4247 - Model 001 B/W Dot-matrix Printer

Brands by name

Popular brands

IBM 4247 - Model 001 B/W Dot-matrix Printer, User Manual

Search results

Summary of Contents for 4247 - Model 001 B/W Dot-matrix Printer

Reviews:

Related manuals for 4247 - Model 001 B/W Dot-matrix Printer

Brands by name

Popular brands