4-49
Use a suitable pipe to mount the shaft
seal, but don't push it too deep. If the shaft
ring touches the bearing ring you will
damage the seal ring.
Assemble the circlip.
This discription showes how th change
This discription showes how th change
the drive shaft seal but it isn't the way
the drive shaft seal but it isn't the way
of serial assembly.
of serial assembly.
The seal is assembled together with the
The seal is assembled together with the
taper roller bearing from inside the
taper roller bearing from inside the
motor housing normally to get a secure
motor housing normally to get a secure
sealing condition. If you decide to repair
sealing condition. If you decide to repair
the motor in the shown way be very
the motor in the shown way be very
careful while handling so that the drive
careful while handling so that the drive
shaft wouldn't be damaged during
shaft wouldn't be damaged during
disassembly of the shaft seal.
disassembly of the shaft seal.
Assemble the circlip in the correct
position.
※
(7)
(5)
(6)
7609A4BS37
7609A4BS35
7609A4BS36
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...
