![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435324.webp)
3-268
Only for assembly of new parts :
Only for assembly of new parts :
Install cylindrical roller bearing into
planetary gear by pressing roller bearing
i n t o p l a n e t a r y g e a r by m e a n s o f
assembly sleeve (arrow) until snap ring
engages into annular groove of planetary
gear.
1 Planetary gear
2 Roller bearing (with bearing inner ring
/cylindical rollers/axial discs and snap
ring)
3 Assembly sleeve
Heat up planetary gears and mount to
the pin of the planetary carrier until
contact is obtained, with the large radius/
bearing inner ring showing downwards
(arrow).
Adjust bearing after cooling down.
7577AAXR054
7577AAXR055
Fix planetary gears with retaining ring.
Check contact position of retaining ring
on groove base and readjust, if required.
Special tool
Set of external pliers
5870 900 015
7577AAXR056
③
※
④
※
※
Axial play setting of sun gear shaft :
Axial play setting of sun gear shaft :
1 Planetary carrier
2 Stop pin
3 Brake housing
4 Axle housing
5 Sun gear shaft
6 Shim (s = optional)
7 Stub shaft
X = axial play-sun gear shaft 0.5~2.0 mm
7577AAXR058
(4)
(4)
3
2
1
1
2
5
6
7
3
4
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...