![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435231.webp)
3-175
Housing rear part :
Housing rear part :
Legend see figure TM311.
Place bearing outer rings into the bearing
holes using assembly grease.
If, contrary to the recommendation, the
tapered roller bearings of clutches, input
and output are not replaced, it is impera-
tive to ensure the previous pairing (bear-
ing inner ring/bearing outer ring).
See figure TM054 and TM055.
7609ATM312
(5)
※
※
KV
AN
K2
K3
KR
K4
K1
AB
Due to the installation conditions, the
installation of single clutches without
using the special tool is not possible.
Risk of injury.
Risk of injury.
Install clutches by means of housing rear
part (figure TM320 to TM321).
Housing rear part will be removed again
later.
Place KR clutch, AN input shaft and KV
clutch into the housing rear part at the
same time.
7609ATM313
※
(6)
※
AN
KR
Mount K3 clutch.
7609ATM315
(8)
K3
Slightly lift drive gear and position K4
clutch.
7609ATM314
(7)
AN
K4
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...