![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435303.webp)
3-247
Wet front face (contact face bearing
inner ring, arrow 1) and profile (teeth,
arrow 2) in the output shaft with anti-
corrosive agent.
18
7609AAX162
Align disk package centrally and radially.
Then insert the planetary carrier by
means of the lifting device into the teeth
of the output shaft.
Rear axle
(planetary carrier with 3 planetary gears)
Inner extractor
5870 300 019
Eye bolt
5870 204 073
Front axle
(planetary carrier with 4 planetary gears)
Inner extractor
5870 300 017
Eye nut
5870 204 076
7609AAX163
19
S e t t i n g o f g a p w i d t h o u t p u t s h a f t /
S e t t i n g o f g a p w i d t h o u t p u t s h a f t /
planetary carrier
planetary carrier
Bring planetary carrier with measuring
disk and three old locking screws, which
were removed during disassembly, into
contact position.
·
Tightening torque :
20.4 kgf
·
m (148 lbf
·
ft)
Measuring disk
AA00 360 730
Pivot output 180˚ and measure gap
width from the output shaft to the
planetary carrier (see also subsequent
sketch).
Gap width e.g. . . . . . . . . . . . . . . . 0.21 mm
Then remove the locking screws and the
measuring disk again.
21
20
7609AAX164
7609AAX165
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...