![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435243.webp)
3-187
Place control disk and fix it radially by
means of two cylindrical screws M6
×
12
(1).
Do not tighten the cylindrical screws -
just turn them in until contact is obtained
and then turn them back by approx. 1/2
rotation.
Pay attention to the installation position
of the control disk, see figure.
Place O-ring 182
×
3 (2) into the annular
groove and oil it.
⑤
※
※
7609ATM354
1
With the sealing lip showing downwards,
carefully insert the shaft seal 75
×
905
×
10 (1) into the pump housing (2) until
contact is obtained.
Wet outer diameter of shaft seal with
spirit.
Driver
5870 055 070
Handle
5870 260 002
Oil sliding bearing (see arrow) before the
assembly.
Mount inner installer (S) onto the stator
shaft.
Mount preassembled transmission pump
(1).
Pay attention to radial installation
position.
Inner installer
see figure TM357
※
⑦
※
⑥
※
7609ATM355
7609ATM356
Mount preassembled pump with driver
(S1) until contact is obtained.
Assembly fixture (S
+
S1) 5870 345 126
(Inner installer and driver)
⑧
7609ATM357
1
2
1
S
S1
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...