![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435319.webp)
3-263
Position preassembled brake housing on
the output shaft.
Special tool
Lifting chain
5870 281 047
Eyebolts
5870 204 071
7577AAXR036
Insert sealing elements (arrows) into
annular grooves of brake housing paying
attention to installation position and
arrangement - in this context refer to
figure 7577AAXR028.
Guide ring installation :
Guide ring installation :
Clean annular groove of brake housing
with spirit.
Then insert guide ring into annular
groove - Ensure an exact contact
p o s i t i o n o f t h e w h o l e g u i d e r i n g
circumference - after wards stick guide
ring with glue (Loctite no. 415) on its
endpoints.
Ensure a correct installation position of
Ensure a correct installation position of
the guide ring
the guide ring - Endpoints of guide ring
to be in 12 o'clock position in the axle
installed in the machine (radial position in
brake housing - area of brake oil supply
and vent hole).
7577AAXR037
1 Brake housing
2 Guide ring
3 Support ring
4 Grooved ring
5 Grooved ring
6 Support ring
7577AAXR038
④
※
⑤
※
2
3
4
5
6
1
2
3
4
5
6
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...