![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435249.webp)
3-193
Fitting of electric control
Fitting of electric control
All single parts are to be checked for
damage and replaced, if required.
Ensure free travel of the moving parts in
the valve block prior to installation.
Pistons can be exchanged individually.
Prior to the installation, oil single parts.
With the concave side showing upwards,
insert orifice (1) until contact is obtained.
See arrows for installation position.
(1)
(1)
The opposite figure shows the following
single parts :
1 Pressure reducing valve
(1EA, piston and compr. spring)
2 Vibration damper
(3EA, piston and compr. spring
3 Follow-on slide
(3EA, piston and compr. spring)
Install the single parts according to
figure TM372.
Preload compression springs of the
follow-on slides and preliminarily fix
pistons by means of cylindrical pins
Ø
5.0 mm (assembly aid), see arrows (S).
②
③
※
7609ATM371
7609ATM372
7609ATM373
1
2
3
S
1
※
①
※
Fit two adjusting screws.
Mount seal (1) and housing (2).
Then position housing equally by means
of adjusting screws until contact is
obtained.
Adjusting screws
5870 204 036
④
7609ATM374
1
1
S
S
2
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...