3-233
Determine dimension III (bearing width).
Dimension III e.g. . . . . . . . . . . . . 39.10 mm
CALCULATION EXAMPLE “A„ :
Dimension I . . . . . . . . . . . . . . . 221.10 mm
Dimension II . . . . . . . . . . . . . . - 181.00 mm
Dimension III . . . . . . . . . . . . . - 39.10 mm
Difference = shim s = 1.00
Difference = shim s = 1.00 mm
mm
Reassembly of input pinion
Reassembly of input pinion
Undercool the external bearing outer ring
and insert it into the axle drive housing
until contact is obtained.
Driver tool
5870 058 079
Handle
5870 260 004
③
④
7609AAX114
7609AAX115
7609AAX113
7609AAX116
Insert the determined shim e.g. s =
1.00 mm into the housing hole.
Undercool the internal bearing outer ring
and bring it into contact position in the
housing hole by using the assembly
fixture.
Assembly fixture
5870 345 080
⑤
⑥
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...