![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435250.webp)
3-194
Bring housing (1) into contact position by
means of the Torx screws. This will
preload the pistons, and you can remove
the cylindrical pins (assembly aid).
⑤
7609ATM375
1
Fix housing by means of Torx screws (1).
·
Tightening torque (M5/10.9
×
30) :
0.56 kgf
·
m (4.06 lbf
·
ft)
Reducing adapter
5870 656 056
Socket wrench TX-27
5873 042 002
Mount pressure controllers with O-ring
13.5
×
2 (1) and fasten them by means of
fixing plates (2) and Torx screws (3).
Install fixing plate, with the claw showing
downwards.
Pay attention to the radial installation
position of pressure controllers, see
figure.
·
Tightening torque (M5/8.8
×
12) :
0.56 kgf
·
m (4.06 lbf
·
ft)
Reducing adapter
5870 656 056
Socket wrench TX-27
5873 042 002
⑦
※
⑥
7609ATM376
7609ATM377
Preassemble the opposite side
Preassemble the opposite side
The figure on the right shows the
following single parts :
1 Main pressure valve
(1EA, Piston a. compr.spring)
2 Vibration damper
(3EA, Piston a. compr.spring)
3 Follow-on slide
(3EA, Piston a. compr.spring)
⑧
7609ATM378
1
2
1
S
3
2
1
3
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...