![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435335.webp)
3-279
Determine dimension III bearing width,
ensure here that the rollers are located
without any play (rotate bearing inner
ring in both directions several times -
roller setting).
Since the installed roller bearing is
subject to a pre-load in installation
position, deduct an experience value of
-0.05 mm.
Dimension III = e.g. . . . . . . . . . . . . . .
Dimension III = e.g. . . . . . . . . . . . . . .
33.67 mm - 0.05 mm = 33.62 mm
33.67 mm - 0.05 mm = 33.62 mm
CALCULATION EXAMPLE e.g. :
Dimension I . . . . . . . . . . . . . 182.81 mm
Dimension II + III (148.00 + 33.62) . . . . .
- 181.62 mm
Result . . . . . . . . . . . . . . . . . . = 1.19 mm
Required shim S = 1.20 mm
Required shim S = 1.20 mm
Insert determined shim into the hole of
the axle drive housing - see figure
7577AAXR085.
Special tool
Digital-depth gauge
5870 200 072
Gauge blocks
5870 200 066
7577AAXR088
⑤
⑥
※
Undercool bearing outer ring (see arrow)
and bring it into contact position in the
inner bearing hole/pinion bearing by
means of the fixture.
Special tool
Assembly fixture
5 8 7 0 3 4 5
049
7577AAXR089
⑦
※
Install outside bearing outer ring/pinion
bearing
Special tool
Assembly fixture
5870 345 049
7577AAXR090
⑧
※
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...