![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435369.webp)
4-26
Adjusting instructions
Adjusting instructions
Place the machine on flat ground and secure against rolling away.
Release the parking brake by application of the required release pressure (min. 130 bar).
Rotate the screw cap (5) in a counter-clockwise direction and unscrew it.
Release the lock nut (1) of the setting screw (2).
Insert a setting gauge on both sides between the brake lining carrier and brake disc and hold
them in position.
The setting gauge must be selected in accordance with the table under (2) "Clearance
The setting gauge must be selected in accordance with the table under (2) "Clearance
adjusting".
adjusting".
Turn the setting screw (2) in a clockwise direction until the two setting gauges are clamped
between the brake lining carriers and the brake disc.
Apply the lock nut (1) to the setting screw (2).
The application pressure for clamping the setting gauges must be selected so that both
The application pressure for clamping the setting gauges must be selected so that both
gauges can be removed using a small amount of force after locking in position.
gauges can be removed using a small amount of force after locking in position.
Release the counter nut (4) and then turn the adjusting screw (3) in a clockwise direction until
the end surface of the adjusting screw (3) is in contact with the surface provided for setting.
Hold the adjusting screw (3) in position and lock using the counter nut (4).
Remove the setting gauge from both sides of the brake disc.
The adjustment of the desired air gap is now complete. The brake is ready for use.
The adjustment of the desired air gap is now complete. The brake is ready for use.
Turn the screw cap (5) in a clockwise direction and tighten hand-tight.
Actuate the brake valve several times and check the holding effect of the parking brake on
Actuate the brake valve several times and check the holding effect of the parking brake on
a suitable incline or a suitable gradient.
a suitable incline or a suitable gradient.
(3)
(3)
①
②
③
④
⑤
※
⑥
⑦
※
⑧
⑨
⑩
※
⑪
※
1
4
7
3
6
2
5
7
8
10
9
7609A4BS22
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...