![background image](http://html.mh-extra.com/html/hyundai/hl955/hl955_manual_2196435235.webp)
3-179
Fit both cylindrical pins 10
×
24 (1)
centrically to the mounting face.
7609ATM327
1
1
(20)
Checking of clearance of the gear drive
Checking of clearance of the gear drive
train
train
Position driving element and rotate KV
clutch shaft.
If you notice an interference of the
movable parts (e.g. on the screen sheet or
on the oil tubes), you must correct this
fault.
Do this step on all clutch shafts.
Driving element
5870 345 089
Crank handle
5870 280 007
7609ATM328
7609ATM329
2
1
3
Fix housing front and rear part by means
of cylindrical screws (1).
·
Tightening torque (M10/8.8
×
50) :
4.69 kgf
·
m (33.9 lbf
·
ft)
Mount fixing plate (2).
Mount stud bolts (3).
Wet screw-in thread with loctite (type No.
243).
·
Tightening torque (M8/10.9
×
25) :
1.53 kgf
·
m (11.1 lbf
·
ft)
1
(21)
※
(22)
※
7609ATM330
1
The screw plugs (1) must be mounted with
a hydraulic pneumatic pressing tool.
In case of damage the premounted
transmission housing rear part should/
must be fully replaced.
1
(23)
※
Summary of Contents for HL955
Page 557: ...7 6 MEMORANDUM MEMORANDUM ...