![background image](http://html1.mh-extra.com/html/hyundai/hl630vl/hl630vl_operators-manual_2196161137.webp)
4-18 Inspection, Maintenance and Adjustment
Replacement of tire
Fig 14
Fig 15
Fig 16
If a wheel and tire must be removed from machine and
replaced, or if a tire must be replaced on wheel, use only
experienced and trained service personnel. A tire rim could
be propelled off wheel and cause death or serious injury. See
Figure 13.
1. Before replacement of Tire, pull up and lock the hand
brake, hang the warning label on the control lever to
prevent others to operate the equipment.
2. Lower the external support (if any) down to ground to fix
the machine.
3. When you use wheel wedges, ensure that there is no
other Tire is being replaced.
WARNING
Note
When you install the Tires, pay attention to the rotation direction
marked on the Tire. If there is no such marks, check the threads
to make it orient towards the front of the machine.
Note:
Please use standard Tires. Using uncommissioned Tires
may cause accidental wear to increase the load for the
end drive.
1. Park the equipment on the flat ground.
2. Use a jack which can support the weight of the equipment
to jack-up the equipment, making an adequate clearance
between the Tires and the ground, and put proper strut
under the support to sustain the equipment.
3. Lower the bucket down to the ground
Summary of Contents for HL630VL
