manualshive.com logo in svg

Hyundai HL630VL, Operator'S Manual

Share
Download
Hyundai HL630VL Operator'S Manual Download Page 122

Inspection, Maintenance and Adjustment 4-3

PREPARATION AND SETTING 

OF THE EQUIPMENT BEFORE 

MAINTENANCE

Park the vehicle as the following requirements before perfor-
mance of maintenance according to the regulations in this man-
ual. 

Note: 

Some special maintenance requires the machinery has 
different parking mode. However, after completion of 
maintenance, the machine must be reset to the following 
positions. 

1.  Park on the hard plane. 
2.  Put the Bucket on the ground.
3.  Switch off the engine and pull off the key
4.  Put the control lever at middle position

Fig 3

Especially be careful for running the engine during the 
maintenance. When the engine is running, let one person 
always stand in the cab without leaving.

WARNING

5.  Before starting work, hang a warning sign “Do Not Touch 

When Performing Inspection Or Maintenance” on the cab 
door or on the working pole.

Summary of Contents for HL630VL


































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands