![background image](http://html1.mh-extra.com/html/hyundai/hl630vl/hl630vl_operators-manual_2196161088.webp)
Operation Controls 2-37
Reversing auto alarm system
Reversing alarm device is located by side of the lift cylinder of
the engine cover (Fig.55). When you operate the gearshift han-
dle to back the vehicle, the reversing alarm device will automati-
cally hoot. Lifting device for engine hood
The rising and dropping of the integrated engine hood of this
machine is controlled by hand-operated cylinder and cylinder
mechanism which is installed in the right battery box of the ma-
chine. The action of the lifting device is realized by using the
attached handle, and the rising and dropping of the engine hood
through the switching of the reversing valve on the hand-operat-
ed pump
Adjustment of steering gear
The inclination of steering gear of this machine may be adjusted
within a certain range to adapt to driver’s operation customs.
There is a spanner at the middle of steering gear (Fig.56). The
method of adjusting the inclination angle of the steering gear is
as follows.
Use angle adjustment handle to raise the spanner to adjust the
steering gear to a proper position, and then release the span-
ner.
Fig 68
Fig 69
Power socket
The output voltage of the power supply socket (Fig.73) is 24V,
which can supply power for the mobile phone, car MP3 and oth-
er electrical parts
Fig 70
Summary of Contents for HL630VL
