![background image](http://html1.mh-extra.com/html/hyundai/hl630vl/hl630vl_operators-manual_2196161063.webp)
2-12 Operation Controls
Engine stop cable
The engine cutoff of this machine is realized by pulling the cut-
off cable.when the engineis running,if you pull up the cutoff ca-
ble,the engine will be flame out.
Immediate direction-changing function
There is no direction-changing interlocking function for shifting
manipulating handle of this machine. The driver can, based
on the vehicle speed, immediately change the direction of the
vehicle (it is required that the vehicle speed shall be less than
10Km/h when the direction is changed)
●
For forward 1 and 2 positions, you can engage them to
reverse position at any time. However, because this ma-
chine has only Reverse 1 Position, therefore, if you toggle
the lever to the Reverse position, it is always the Reverse
1 Position.
Fig 15
Do not selfishly change the shifting manipulating system
when the shifting manipulating system of the vehicle is in
fault !
If the fault cannot be removed, please contact with authorized
maintenance station and after sales service company of
Hyundai
for the maintenance.
NOTE
Summary of Contents for HL630VL
