![background image](http://html1.mh-extra.com/html/hyundai/hl630vl/hl630vl_operators-manual_2196161120.webp)
Inspection, Maintenance and Adjustment 4-1
The maintenance and inspection of the equipment are
necessary in order to keep the equipment working in normal
conditions. The time interval, each system and components
position and inspection method are listed as follows:
Note:
The following items list the content and time interval
for the maintenance and inspection. The maintenance
period may be shorten depending on actual conditions.
The extreme heat or dirty environment is needed to be
maintained more frequently. For maintenance period,
refer to the engine working time shown on the cluster
display of the console in cabin. (Fig.1)
Fig 1
Inspection, Maintenance
and Adjustment
Series No.
There two Series NO plate attached on the body of the loader.
The main Series NO. plate is positioned in the front of the front
frame. The engine Series No is stuck to the left of the engine
body and above the oil sump. Other descriptions related the
engines are positioned on a label on the cylinder head.
Note
that these numbers and their positions are very important
to the maintenance at any times during Warranty period.
Summary of Contents for HL630VL
