MAINTeNANCe AND RePAIR
5-8
powermax
65/85
Operator Manual
Fault
code
Description
Power
leD
Fault
leD
Fault
icon
Solutions
0-50
Retaining cap off
On
On
• Turn OFF the power
supply. Verify that the
consumables are installed
and restart the power
supply.
• If the consumables appear
to be installed correctly,
the torch may be damaged.
Contact your Hypertherm
distributor or authorized
repair facility.
0-51
Start/trigger signal on at
power up
This situation indicates
that the power supply is
receiving a start signal. It
is sometimes referred to
as a “stuck start.”
On
On
• If the power supply is
turned on while the
torch trigger is pressed,
the system is disabled.
Release the trigger and
recycle the power switch.
Summary of Contents for Powermax 65
Page 1: ...Plasma arc cutting systems Operator Manual 806650 Revision 0 85 ...
Page 10: ...Table of Contents vi powermax65 85 Operator Manual WARRANTY vi Hypertherm ...
Page 30: ...Specifications 1 16 powermax65 85 Operator Manual ...
Page 140: ...Maintenance and Repair 5 12 powermax65 85 Operator Manual ...