SPeCIFICATIONS
1-12
powermax
65/85
Operator Manual
Powermax65 cutting specifications
Handheld cut capacity (material thickness)
Recommended cut capacity at 20 ipm (500 mm/min)
3/4 in (19 mm)
Recommended cut capacity at 10 ipm (250 mm/min)
1 in (25 mm)
Severance capacity at 5 ipm (125 mm/min)
1-1/4 in (32 mm)
Mechanized pierce capacity (material thickness)
Pierce capacity (for edge starts, the capacities are the
same as the handheld capacities)
1/2 in (12 mm)
Maximum cut speed
*
(mild steel)
1/4 in (6 mm)
145 ipm (4000 mm/min)
1/2 in (12 mm)
50 ipm (1400 mm/min)
3/4 in (19 mm)
24 ipm (600 mm/min)
1 in (25 mm)
12 ipm (320 mm/min)
Gouging capacity
Metal removal rate on mild steel
10.7 lbs/hr (4.8 kg/hr)
Duramax series torch weights (refer to “Component weights” on page 1-5)
Duty cycle and voltage information (refer to “Powermax65 power supply ratings” on
page 1-6)
* Maximum cut speeds are the results of Hypertherm’s laboratory testing. Actual cutting speeds
may vary based on different cutting applications.
Summary of Contents for Powermax 65
Page 1: ...Plasma arc cutting systems Operator Manual 806650 Revision 0 85 ...
Page 10: ...Table of Contents vi powermax65 85 Operator Manual WARRANTY vi Hypertherm ...
Page 30: ...Specifications 1 16 powermax65 85 Operator Manual ...
Page 140: ...Maintenance and Repair 5 12 powermax65 85 Operator Manual ...
