OPeRATION
4-4
powermax
65/85
Operator Manual
Power ON leD (green)
When illuminated, this LED indicates that the power switch has been set to I (ON) and
that the safety interlocks are satisfied. When blinking, the power supply has a fault.
Fault leD (yellow)
When illuminated, this LED indicates that there is a fault with the power supply.
For information about these fault conditions and how to correct them, see “Basic
troubleshooting” on page 5-4
.
Operating mode switch
The operating mode switch can be set in one of four positions:
• Continuous pilot arc. Cuts expanded metal or grate.
• Non-continuous pilot arc. Cuts or pierces metal plate.
This is the standard setting for normal drag-cutting.
• Gouge. Gouges metal plate.
• Torch lock. Same as the non-continuous pilot arc mode
except the torch is locked in the ON position when you
release the trigger during a cut.
AC
Summary of Contents for Powermax 65
Page 1: ...Plasma arc cutting systems Operator Manual 806650 Revision 0 85 ...
Page 10: ...Table of Contents vi powermax65 85 Operator Manual WARRANTY vi Hypertherm ...
Page 30: ...Specifications 1 16 powermax65 85 Operator Manual ...
Page 140: ...Maintenance and Repair 5 12 powermax65 85 Operator Manual ...
