TORCH SeTUP
powermax
65/85
Operator Manual
3-21
3
4
12
13
14
5
6
Refer to the following table when connecting the Powermax65 or Powermax85 to a torch height
controller or CNC controller with a machine interface cable.
Signal
Type
Notes
Connector
sockets
Cable wires
Start
(start
plasma)
Input
Normally open.
18 VDC open circuit voltage at
START terminals. Requires dry
contact closure to activate.
3, 4
Green, black
Transfer
(start
machine
motion)
Output
Normally open. Dry contact closure
when the arc transfers.
120 VAC/1 A maximum at the
machine interface relay or switching
device (supplied by the customer).
12, 14
Red, black
Ground
Ground
13
Voltage
divider
Output
Divided arc signal of 20:1, 21.1:1,
30:1, 40:1, 50:1 (provides a
maximum of
18 V).
5, 6
Black, white
Summary of Contents for Powermax 65
Page 1: ...Plasma arc cutting systems Operator Manual 806650 Revision 0 85 ...
Page 10: ...Table of Contents vi powermax65 85 Operator Manual WARRANTY vi Hypertherm ...
Page 30: ...Specifications 1 16 powermax65 85 Operator Manual ...
Page 140: ...Maintenance and Repair 5 12 powermax65 85 Operator Manual ...