1
2
INSTALL MOUNTING
BRACKET WITH
ARROW POINTING UP
FOR BOTH RH & LH
DOORS. MOUNT CLOSER
WITH SPRING ADJUSTING
SCREW TOWARDS
HINGE. (USE TEMPLATE
ENCLOSED TO LOCATE
AND DRILL HOLES)
© Sargent Manufacturing Company
A7315F
1
RIGHT HAND
DOOR SHOWN
DRILL & TAP AND USE SCREWS PROVIDED
OR USE MORTISE NUTS WHEN REQUIRED.
SPRING POWER
ADJUSTING SCREW
4
A7315F
© Sargent Manufacturing Company
DETERMINE MAXIMUM DEGREE OF DOOR OPENING OR HOLD OPEN (PSH)
REQUIRED. DRILL AND TAP DOOR AND FRAME FOR #12-24 MACHINE SCREWS.
WHEN USING SELF TAPPING SCREWS PROVIDED, PREDRILL WITH 3/32” DRILL.
•
DO NOT USE WITH SWING CLEAR HINGE FOR DOOR OPENINGS
GREATER THAN 95°. USE ALTERNATE TYPE HINGES.
g
DEAD STOP OCCURS 3° BEYOND HOLD OPEN
3A
INSTALL STOP WITH 1/4” HEX WRENCH TO
MATCH HAND OF DOOR.
1/2"
7/8"
5/8"
PSH ARM SHOWN
PS SIMILAR
IMPORTANT
: USE A MINIMUM OF 5 SCREWS.
USE FIFTH
HOLE SPAC-
ER WHEN
REQUIRED
USING 1/4” HEX
WRENCH, TURN
STOP COUNTER-
CLOCKWISE UNTIL
SEATED VERY TIGHT.
MOUNT FOOT BRACKET TO DOOR
STOP.
STOP
PLUG
1/4" HEX
WRENCH
ALTERNATE: PREASSEMBLE ARM PRIOR TO
ATTACHING TO STOP.
3B
3C
DEGREE OF DOOR OPENING AT “HOLD OPEN”
g
85°
90°
95°
100°• 105°• 110°•
DIM. “A”
10-1/2” 9-13/16” 9-3/16” 8-9/16” 8-1/16” 7-9/16”
DIM. “B”
5-11/16” 5”
4-3/8” 3-3/4” 3-1/4” 2-3/4”
IMPORTANT NOTICE
PRE-DRILL 3/32”
HOLES FOR SELF-
TAPPING SCREWS
OR TAP #12-24 FOR
MACHINE SCREWS
+
or
PULL SIDE PULL SIDE
PUSH SIDE PUSH SIDE
LEFT HAND DOOR RIGHT HAND DOOR
CLOSERS ARE NON-HANDED
13/16"
CENTERLINE
OF
HINGE
1-15/16"
2-11/16"
13/16"
5/16"
3-1/16"
3-7/8"
1-7/8"
“B”
3"
10-3/8"
1"
CENTERLINE
OF
HINGE
(FROM STOP)
RIGHT HAND
SHOWN;
LEFT HAND
OPPOSITE.
INSTALLATION INSTRUCTIONS for
281 Door Closer with PS/PSH Arms
281 Series Adjustable form size 1 thru 6
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.
FOR ASSISTANCE CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com
FOR ASSISTANCE, CONTACT SARGENT AT 800-727-5477 or www.sargentlock.com
RIGHT HAND
DOOR SHOWN
DRILL & TAP AND USE SCREWS PROVIDED
OR USE MORTISE NUTS WHEN REQUIRED.
SPRING POWER
ADJUSTING SCREW
A7315F.indd 1
10/24/18 12:59 PM
