Operating and Maintenance Instruction FCU 8000-1 series
Doc.: 3109776 Ed.: 01/13.02.2002
HYDAC Filtertechnik GmbH
E
Page 80
5.5.3 Key functions
5.5.3.1 Control keys (grey)
ok
start
stop
confirm entries,
start measurement
abort entries,
stop measurement
scroll through menus
+
-
alphanumeric data
(in entry mode)
scroll through selection to
increase/decrease
(if the menu symbol "
" is displayed)
5.5.3.2 Menu and number keys (red)
mode
memory
limits
select measuring mode
(with/without relay control)
edit log memory (name of
measuring poit,
adjust limit values for control
(via relay 1 and 2)
averaging interval, deletion etc)
(online, stored logs etc.)
of filtration units
0
1 2 3
4 5 6
7 8 9
direct input of
digits (input mode only)
numbers with several
setup
edit setup
(Autostart, Date / timet etc.)
ISO
display results in ISO-Code
(this key only functions
during an active measurement)
NAS
display illumination
press 1x - auto off after 20 s
Partikel
press 2x - permanently on
press 1x to switch off
(FCU 8110 only)
(this key only functions
during an active measurement)
(this key only functions
during an active measurement)
display number of particles
display results in NAS-Code
