Operating and Maintenance Instruction FCU 8000-1 series
Doc.: 3109776 Ed.: 01/13.02.2002
HYDAC Filtertechnik GmbH
E
Page 111
7.5 SETUP Menu (determining basic settings)
Description
Under this menu the user can carry out or alter different basic settings himself.
Operation
BS pressure supply
Autostart
Abort at Q = 0
Date / time
Bus address
Operating hours
Pump pre-run time
SETUP-Taste
Battery voltage
Additional test
yes
The FCU starts automatically after switching on with
measuring in the pre-set measurement mode (Autostart
function)
Autostart:
no
Start of measurement must be triggered manually.
yes
If the flow rate through the sensor falls to the value "0",
then measurement is aborted and the FCU switched off.
Abort at Q = 0
no
If the flow rate through the sensor falls to the value "0",
then measurement is aborted, but the FCU still remains
switched on and continues measuring when sufficient flow
is available.
