Operating and Maintenance Instruction FCU 8000-1 series
Doc.: 3109776 Ed.: 01/13.02.2002
HYDAC Filtertechnik GmbH
E
Page 105
7.3.2 Starting measurement without averaging interval
Description
In this mode of operation, immediately after new measurement values have been
determined, they are displayed in the display on the front of the FCU, stored and, if online
printing is activated, printed out on the printer. The period of time between the individual
measurement points is determined by the pre-set flow rate.
Operation
MEMORY key
Measurement point
Averaging interval
Selective deletion
Delete all
ok
start
Change meas. point
Typical application
Monitoring the oil cleanliness on hydraulic units with the possibility of running comparative
measurements at the same measurement point over a longer period.
memory
MEMORY
Meas. point
MEMORY
Averaging interval
ok
start
Averaging interval :
0
min
+
-
0
1 2 3
4 5 6
7 8 9
or
stop
ok
start
MEMORY
Averaging interval
ok
start
