Husqvarna TC 250 2011, Specifications - Operation - Maintenance

Page: 108 / 296

5
4
2
3
A
C
B
7
5
4
6
3
EN - 52
TAIL LIGHT
The back light is a LED light.
- remove the two filaments bulb (7) connector (2) and the boot
(3);
- remove the screw (6);
- release the bulb holding spring (4) and then the bulb itself.
To replace the parking light bulb (5) extract it from the inside
cover.
After replacement, reverse operations for reassembly.
HEADLAMP BULBS REPLACEMENT (TE)
To gain access to the healamp bulbs, proceede as follows:
- remove the upper fastening screw of the the headlamp carrier to
the instrument panuel support (A);
- push forward the headlamp carrier (B) and pull it towards the
high (C) in order to uncouple from the two lower supports.
- remove the headlamp carrier;