Huawei SmartLogger2000 series User Manual Download Page 90

Page: 90 / 230

SmartLogger2000
User Manual

6 Man-Machine Interaction

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

Indicator (Silk Screen)

Status

Meaning

Green steady on

Local maintenance
succeeds.

Blinking green at short
intervals (0.125s on and
0.125s off)

Local maintenance fails.

After upgrade is complete, the SmartLogger automatically restarts.



Method 2

http://support.huawei.com/carrier/

, browse or search for SmartLogger on

the

Product Support

tab page, and download the required upgrade package on the

Software

tab page.

The upgrade package is named

smartlogger2000.zip

. Store the upgrade package in the root directory of

a USB flash drive, and do not decompress it.

Insert the USB flash drive into the USB port at the bottom of the SmartLogger.

More

Device Update

on the main menu, and update the

device. For details, see the

SUN2000 APP User Manual

The SmartLogger automatically executes commands. The LED indicator status
reflects the execution situation. For details, see the

Table 6-1

After upgrade is complete, the SmartLogger automatically restarts.

----End

6.1.5 Upgrading the BSP

Context

It is recommended that you use a SanDisk, Netac, or Kingston USB flash drive to ensure
compatibility.

For details about how to upgrade the board support package (BSP), see

SmartLogger Upgrade

Guide

or contact Huawei technical support.

Procedure

Step 1

http://support.huawei.com/carrier/

, browse or search for SmartLogger on the

Product Support

tab page, and download the required upgrade package on the

Software

tab

page.

The upgrade package is named

smartlogger2000_bsp.zip

. Store the upgrade package in the root

directory of a USB flash drive, and do not decompress it.

Summary of Contents for SmartLogger2000 series







































































































































































































































Search results

Summary of Contents for SmartLogger2000 series

Reviews:

Huawei SmartLogger2000 series, User Manual, Page: 90 / 230

Search results

Summary of Contents for SmartLogger2000 series

Reviews: