Huawei SmartLogger2000 series User Manual Download Page 12

Page: 12 / 230

SmartLogger2000
User Manual

1 Safety Precautions

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

Operation

Perform operations in strict accordance with safety precautions specified in this document and
other relevant documents.

When operating Huawei equipment, you must follow the local laws and regulations.

Maintenance and Replacement



A faulty SmartLogger requires overall maintenance. Contact the dealer if the
SmartLogger is faulty.



With sufficient knowledge of this document, maintain the SmartLogger by using proper
tools and testing equipment.



When maintaining the SmartLogger, wear electrostatic discharge (ESD) gloves and
comply with ESD precautions.



The device has multiple inputs. Switch off all inputs before maintenance.

Summary of Contents for SmartLogger2000 series







































































































































































































































Search results

Summary of Contents for SmartLogger2000 series

Reviews:

Huawei SmartLogger2000 series, User Manual, Page: 12 / 230

Search results

Summary of Contents for SmartLogger2000 series

Reviews: