Huawei SmartLogger2000 series User Manual Download Page 107

Page: 107 / 230

SmartLogger2000
User Manual

7 WebUI

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

Figure 7-12

Device running information

7.8 Device Monitoring

7.8.1 Querying Device Status

The indicator in front of the device name indicates the current status of a device.



If the indicator is

, the inverter is in the

On-grid

state, the EMI, power meter, slave

SmartLogger, or PLC module is in the

Online

state, and the PID module is the

Running

state.



If the indicator is

, the inverter, EMI, power meter, slave SmartLogger, PLC module,

or PID module is in the

Disconnection

state.



If the indicator is

, the inverter is in the

Loading

state.



If the indicator is

, the inverter is in the

Initializing

Power-Off

Idle

, or any other

state in which it does not feed power to the power grid.

If a device is in the

Disconnection

state, its parameters cannot be set.

7.8.2 SmartLogger

7.8.2.1 Querying Master SmartLogger-Related Information

Choose

Monitoring

Logger(Local)

and query master SmartLogger-related information on

the displayed page.

Summary of Contents for SmartLogger2000 series







































































































































































































































Search results

Summary of Contents for SmartLogger2000 series

Reviews:

Huawei SmartLogger2000 series, User Manual, Page: 107 / 230

Search results

Summary of Contents for SmartLogger2000 series

Reviews: