Huawei SmartLogger2000 series User Manual Download Page 167

Page: 167 / 230

SmartLogger2000
User Manual

7 WebUI

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

157

Figure 7-54

Setting IEC103 parameters



Third-party devices and Huawei devices must be connected to different ports of the SmartLogger.
Otherwise, the communication will be abnormal.



The value of

IEC103 IP

must be consistent with the NetEco IP address.

7.10.2.7 Setting IEC104 Parameters

If the SmartLogger connects to a third-party NMS over the IEC104 protocol, IEC104
parameters must be correctly set to enable the third-party NMS to monitor the running status
of devices connected to the SmartLogger.

Because of permission restriction, log in as

Advanced User

. Choose

Settings

IEC104

access the target page.

Summary of Contents for SmartLogger2000 series







































































































































































































































Search results

Summary of Contents for SmartLogger2000 series

Reviews:

Huawei SmartLogger2000 series, User Manual, Page: 167 / 230

Search results

Summary of Contents for SmartLogger2000 series

Reviews: