Huawei SmartLogger2000 series User Manual Download Page 81

Page: 81 / 230

SmartLogger2000
User Manual

4 Electrical Connection

Issue 04 (2018-04-10)

Huawei Proprietary and Confidential

Step 4

Determine the operating status based on the Ethernet optical port indicators.

Figure 4-29

Ethernet optical port indicators

Table 4-7

Ethernet optical port indicator description

Indicator

Status

Meaning

(1) Upper port

(2) Lower port

Green and yellow off

No optical module is
inserted into the Ethernet
optical port.

Green steady on and blinking yellow at
short intervals (0.1s on and 0.1s off)

The fiber link is being set
up.

Green steady on and yellow blinking
intermittently

The data is being
transmitted.

Green steady on and blinking yellow at
long intervals (0.1s on and 1.9s off)

The fiber link is normal.

----End

Follow-up Procedure

Disconnection can be performed in reverse order.

When removing a fiber jumper, press down the clip first.

When removing an optical module, press down the handle and pull the module outwards.

Summary of Contents for SmartLogger2000 series







































































































































































































































Search results

Summary of Contents for SmartLogger2000 series

Reviews:

Huawei SmartLogger2000 series, User Manual, Page: 81 / 230

Search results

Summary of Contents for SmartLogger2000 series

Reviews: