Huawei RH8100 V3 User Manual Download Page 161

Page: 161 / 386

Step 4 Remove the riser cards, PCIe cards, RAID controller cards, and supercapacitors (or

iBBUs) from the front I/O module, and place the front I/O module in an ESD bag.
For details, see

5.5.5 Removing a Riser Card

5.5.7 Removing a PCIe Card

5.5.9

Removing a RAID Controller Card

5.5.11 Removing an iBBU

, and

5.5.13

Removing a Supercapacitor

----End

5.5.2 Installing a Front I/O Module

This topic describes how to install a front I/O module.

Scenarios

Install a front I/O module if:
●

The front I/O module has failed.

●

A riser card on the front I/O module has failed.

●

A PCIe card on the front I/O module has failed.

●

A RAID controller card on the front I/O module has failed.

●

An iBBU on the front I/O module has failed.

●

A supercapacitor on the front I/O module has failed.

●

The hard disk backplane on the front I/O module has failed.

Prerequisites

Conditions
●

You have powered off the RH8100 V3. For details, see

6.2 Powering Off the

RH8100 V3

. Then you have removed all power cables from the server.

●

You have installed PCIe cards on the front I/O module to be installed. For

details, see

5.5.8 Installing a PCIe Card

●

You have installed riser cards on the front I/O module to be installed. For

details, see

5.5.6 Installing a Riser Card

●

You have installed RAID controller cards on the front I/O module to be

installed. For details, see

5.5.10 Installing a RAID Controller Card

●

You have installed iBBUs on the front I/O module to be installed. For details,

see

5.5.12 Installing an iBBU

●

You have installed supercapacitors on the front I/O module to be installed. For

details, see

5.5.14 Installing a Supercapacitor

Data
●

You have obtained the cabinet number and chassis number of the RH8100 V3.

●

You have located the RH8100 V3 based on the preceding information, and

labeled its panel to prevent misoperations.

●

You have determined the position on the RH8100 V3 for removing the front

I/O module.

Tools

RH8100 V3 Server

User Guide

5 Removing and Installing Parts of the RH8100 V3

Issue 30 (2019-12-19)

151

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands