Huawei RH8100 V3 User Manual Download Page 85

Page: 85 / 386

Item

Specifications

PSU

You can choose 3000 W AC, 2000 W AC, or 2500 W DC

PSUs.
The PSUs can be configured in 2+2 or 1+1 redundancy

mode.

System management

Supports remote management, WebUIs, virtual KVM,

and standard protocols such as IPMI 2.0 and SNMP.

Security

Power-on password and administrator password.

Supported OSs

For details, see

Intelligent Computing Compatibility

Checker

2.11 Technical Specifications

This topic describes the technical specifications for the RH8100 V3.

Table 2-37

describes the technical specifications for the RH8100 V3.

Table 2-37 Technical specifications

Category

Item

Specifications

Mechanical

specifications

Chassis

dimensions (H

x W x D)

352 mm x 447 mm x 855 mm (13.86 in. x

17.60 in. x 33.66 in.)

Installation

space

The server fits into a universal cabinet

complying with the IEC 297 standard.
● Cabinet width: 19 in.
● Cabinet depth: > 1000 mm (39.37 in.)
Guide rail installation requirements are as

follows:
● L-shaped guide rails: apply only to a

Huawei cabinet.

● Adjustable guide rails: apply to a cabinet

with a distance between the front and rear

mounting bars of 543.5 mm (21.40 in.) to

848.5 mm (33.41 in.).

● Holding rails: apply to a cabinet with a

distance between the front and rear

mounting bars of 610 mm (24.02 in.) to

914 mm (35.98 in.).

RH8100 V3 Server

User Guide

2 About the RH8100 V3

Issue 30 (2019-12-19)

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands