Huawei RH8100 V3 User Manual Download Page 157

Page: 157 / 386

Figure 5-32 Removing an indicator board interface module

Step 6 Place the removed interface module in an ESD bag.

----End

5.4.4 Installing an Indicator Board Interface Module

This topic describes how to install an indicator board interface module.

Scenarios

Install an indicator board interface module if the original one has failed.

Prerequisites

Conditions
●

You have powered off the RH8100 V3. For details, see

6.2 Powering Off the

RH8100 V3

. Then you have removed all power cables from the server.

●

You have removed the DVD drive+LCD module from the RH8100 V3. For

details, see

5.3.1 Removing a DVD Drive+LCD Module

●

You have removed the indicator board. For details, see

5.4.1 Removing the

Indicator Board

Data
●

You have obtained the cabinet number and chassis number of the RH8100 V3.

●

You have located the RH8100 V3 based on the preceding information, and

labeled its panel to prevent misoperations.

RH8100 V3 Server

User Guide

5 Removing and Installing Parts of the RH8100 V3

Issue 30 (2019-12-19)

147

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands