Huawei RH8100 V3 User Manual Download Page 40

Page: 40 / 386

Sym

bol

Meaning

Color Single-System Mode

Dual-System Mode

0–23 Hard disk

status

indicators

(available

only on

the FM-B)

Yello

w and

green

● Off: The hard disk

cannot be detected

and is not in a RAID

group.

● Blinking green at 1

Hz: The secondary

disk in a RAID group

is synchronizing data

from the primary

disk.

● Blinking green at 4

Hz: Data access is

being performed on

the disk or the

primary disk in a

RAID group is

synchronizing data

from the secondary

disk.

● Steady green: The

hard disk is detected

and inactive.

● Blinking red at 1 Hz:

The hard disk is

located.

● Blinking red at 4 Hz:

The hard disk in a

RAID group cannot

be detected.

● Steady red: The hard

disk is faulty.

● Off: The hard disk

cannot be detected

and is not in a RAID

group.

● Blinking green at 1

Hz: The secondary

disk in a RAID group is

synchronizing data

from the primary disk.

● Blinking green at 4

Hz: Data access is

being performed on

the disk or the

primary disk in a RAID

group is synchronizing

data from the

secondary disk.

● Steady green: The

hard disk is detected

and inactive.

● Blinking red at 1 Hz:

The hard disk is

located.

● Blinking red at 4 Hz:

The hard disk in a

RAID group cannot be

detected.

● Steady red: The hard

disk is faulty.

Primary

VGA

indicator

White This indicator is

unavailable and off.

● Off: System A is not

using the VGA port on

the front panel.

● On: System A is using

the VGA port and

USB2.0 port on the

front panel.

Secondary

VGA

indicator

White This indicator is

unavailable and off.

● Off: System B is not

using the VGA port on

the front panel.

● On: System B is using

the VGA port and

USB2.0 port on the

front panel.

RH8100 V3 Server

User Guide

2 About the RH8100 V3

Issue 30 (2019-12-19)

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands