Huawei RH8100 V3 User Manual Download Page 261

Page: 261 / 386

5.9 Replacing a Fan Module and PSU

This topic describes how to replace a fan module and power supply unit (PSU).

5.9.1 Removing a Fan Module

This topic describes how to remove a fan module.

Scenarios

Remove a fan module if it has failed.

Prerequisites

Conditions
None
Data
●

You have obtained the cabinet number and chassis number of the RH8100 V3.

●

You have located the RH8100 V3 based on the preceding information, and

labeled its panel to prevent misoperations.

●

You have determined the position on the RH8100 V3 for removing a fan

module.

Tools
●

ESD gloves

●

Packaging materials, for example, an ESD bag

Procedure

Step 1 Wear an ESD wrist strap or ESD gloves. For details, see

1 Safety Instructions

Step 2 Press and hold down the plastic latch on the inner side of the fan module handle.

See step (1) in

Figure 5-129

Step 3 Pull the fan module out of the chassis in the arrow direction. See step (2) in

Figure 5-129

RH8100 V3 Server

User Guide

5 Removing and Installing Parts of the RH8100 V3

Issue 30 (2019-12-19)

251

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands