Huawei RH8100 V3 User Manual Download Page 355

Page: 355 / 386

Parameter

Description

RAID Mode

Configures the RAID mode as single-RAID or dual-RAID.
● If the FM-B, FM-C, or FM-D is installed on the

RH8100 V3, RAID Mode is unavailable.
– If the RH8100 V3 is in single-system, RAID Mode

is unavailable regardless of the RAID controller

card quantity.

– In dual-system, system A uses RAID-1 and system

B uses RAID-2.

● If the FM-A is installed on the RH8100 V3 and the

server is in single-system, you can configure the RAID

mode as single-RAID or dual-RAID.
– In single-RAID mode, only RAID-1 can be used.
– In dual-RAID mode, both RAID-1 and RAID-2 can

be used.

● The dual-RAID mode is recommended if the FM-A is

installed on the RH8100 V3 and the server is in dual-

system mode.
– In single-RAID mode, system B has no hard disk.

Therefore, you are advised to switch the RAID

mode from single-RAID to dual-RAID by using the

iBMC of system A. In dual-RAID mode, system A

uses RAID-1 and system B uses RAID-2.

– Do not switch the RAID mode from dual-RAID to

single-RAID.

– Do not use the iBMC of system B to configure the

RAID mode.

If you want to select Dual RAID, ensure that the

RH8100 V3 has two RAID controller cards. Before you

switch the RAID mode between single-RAID and dual-

RAID, ensure that the OS is powered on.
If you want to select Single RAID, ensure that a

compute module with CPUs is installed in slot 1. If you

want to select Dual RAID, ensure that compute

modules with CPUs are installed in slots 1 and 5.
Value: Single RAID or Dual RAID
Setting method: Click an option button.

7. In the RAID Mode area, select Dual RAID, as shown in

Figure 7-35

Figure 7-35 RAID Mode area

RH8100 V3 Server

User Guide

7 Configuring the RH8100 V3

Issue 30 (2019-12-19)

345

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands