Huawei RH8100 V3 User Manual Download Page 124

Page: 124 / 386

Figure 5-3 Hot swap of a memory board

The system starts to migrate data, and the progress bar displays the

migration progress. When the migration progress reaches 100%, the

migration is complete and the faulty memory board powers off.

3. Press the button on the faulty memory board to migrate data to a spare

memory board.
–

If data migration is in progress, the memory board status indicator is

steady on and the ATTN indicator on the memory board is blinking.

–

If you press the memory board button again within 5 seconds, the data

migration is canceled. In this situation, the memory board status indicator

is steady on and the ATTN indicator is off.

–

If you do not press the memory board button again within 5 seconds, the

data migration starts. In this situation, the memory board status indicator

is blinking and the ATTN indicator is off.

–

When the data migration is complete, the faulty memory board powers

off. In this situation, the memory board status indicator and the ATTN

indicator are both off. The memory board is removable.

–

If the data migration fails, the faulty memory board does not power off.

In this situation, the memory board status indicator and the ATTN

indicator are both steady on. The memory board is not removable.

Step 3 When both the memory board ATTN indicator and the memory board button/

status indicator are off, press the button on the memory board. See step (1) in

Figure 5-4

The ejector lever automatically ejects.

RH8100 V3 Server

User Guide

5 Removing and Installing Parts of the RH8100 V3

Issue 30 (2019-12-19)

114

Summary of Contents for RH8100 V3



































































































































































































































































































































































































Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands

Huawei RH8100 V3, User Manual

Search results

Summary of Contents for RH8100 V3

Reviews:

Related manuals for RH8100 V3

Brands by name

Popular brands