Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-31
Example
# Advertise routes to the network segment 10.0.0.0/16.
[Quidway-bgp] network 10.0.0.1 255.255.0.0
5.1.32 peer advertise-community
Syntax
peer
group-name
advertise-community
undo peer
group-name
advertise-community
View
BGP view
Parameter
group-name
: Name of a peer group.
Description
Use the
peer advertise-community
command to enable the transmission of the
community attribute to a peer group.
Use the
undo peer advertise-community
command to cancel the existing
configuration.
By default, the community attribute is not transmitted to any peer group.
Related command:
if-match community-list
,
apply community
.
Example
# Transmit community attribute to the peer group named test.
[Quidway-bgp] peer test advertise-community
5.1.33 peer allow-as-loop
Syntax
peer
{
group-name | peer-address
}
allow-as-loop
[
number
]
undo peer
{
group-name
|
peer-address
}
allow-as-loop
View
BGP view
Parameter
group-name:
Specifies name of the peer group.
peer-address
: Specifies IP address of the peer.
