Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches
Chapter 2 GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-5
interface-number
is interface number. The
interface-number
after the keyword
to
must
be larger than or equal to that before
to
. &<1-10> means that the preceding parameter
can be repeated up to 10 times.
Description
Use the
reset garp statistics
command to reset the GARP statistics information (such
as the packets received/sent and discarded by GVRP/GMRP). If the command has no
parameter, it will clear the GARP statistics information of all the ports.
Related command:
display
garp statistics
.
Example
# Clear GARP statistics information.
<Quidway> reset garp statistics
2.2 GVRP Configuration Commands
2.2.1 display gvrp statistics
Syntax
display gvrp statistics
[
interface interface-list
]
View
Any view
Parameter
Interface-list
: List of Ethernet ports on which the GVRP statistics information is to be
displayed, expressed as
interface-list
= {
interface-type interface-number
} [
to
interface-type interface-number
] }&<1-10>.
interface-type
is interface type, and
interface-number
is interface number. The
interface-number
after the keyword
to
must
be larger than or equal to that before
to
. &<1-10> means that the preceding parameter
can be repeated up to 10 times.
Description
Use the
display gvrp statistics
command to view the GVRP statistics information of
all the Trunk ports, including GVRP status information, failed GVRP registration entries
and the last GVRP data unit origin.
Example
# Display the GVRP statistics information on Ethernet2/1/1.
<Quidway> display gvrp statistics interface ethernet2/1/1
GVRP statistics on port Ethernet2/1/1
GVRP Status : Enabled
