
Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-53
Example
# Set the OSPF route calculation interval of Quidway to six seconds.
[Quidway-ospf-1] spf-schedule-interval 6
3.1.55 stub
Syntax
stub
[
no-summary
]
undo stub
View
OSPF area view
Parameter
no-summary
: ABR is disabled to transmit Summary LSAs to the Stub area.
Description
Use the
stub
command to configure an OSPF area as Stub area.
Use the
undo stub
command to cancel the settings.
By default, no area is set to be a Stub area.
If the router is an ABR, it will send a default route to the connected Stub area. Using the
default-cost
command, you can configure the default route cost value.
In addition, on an ABR, you can configure the
no-summary
argument in the
stub
command to prevent type-3 LSAs from entering the Stub area connected to this ABR.
Related command:
default-cost
.
Example
# Set the type of OSPF area 1 to the Stub area.
[Quidway-ospf-1] area 1
[Quidway-ospf-1-area-0.0.0.1] stub
3.1.56 vlink-peer
Syntax
vlink-peer
router-id
[
dead
{
seconds
|
minimal multi-hello packets
} |
retransmit
seconds
|
trans-delay
seconds
|
hello
seconds
|
simple
password
|
md5
keyid
key
]*
undo vlink-peer router-id