Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Chapter 6 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
6-5
By default, no Apply sub-statement is defined.
This command is one of the Apply sub-statements of Route-policy. When it is used for
setting route information attribute, it sets the next hop address area of route information
passing filtration.
Related command:
if-match interface
,
if-match acl
,
if-match ip-prefix
,
if-match ip
next-hop
,
if-match cost
,
if-match tag
,
route-policy
,
apply local-preference
,
apply
cost
,
apply origin
,
apply tag
.
Example
# Define an Apply sub-statement. Set the next hop address of route information as
193.1.1.8 when it is used for setting route information attribute.
[Quidway-route-policy] apply ip next-hop 193.1.1.8
6.1.6 apply isis
Syntax
apply isis
[
level-1 | level-2 | level-1-2
]
undo apply isis
View
Route policy view
Parameter
level-1
: Sets to import the matched route to Level-1 area.
level-2
: Sets to import the matched route to Level-2 area.
level-1-2
: Sets to import the matched route to both Level-1 and Levle-2 area.
Description
Use the
apply isis
command to configure to apply the level of a matched route to be
imported to Level-1, Level-2 or Level-1-2.
Use the
undo apply isis
command to cancel the Apply sub-statement.
By default, no apply clause is defined.
Related command:
if-match interface
,
if-match acl
,
if-match ip-prefix
,
if-match ip
next-hop
,
if-match cost
,
if-match tag
,
route-policy
,
apply ip next-hop
,
apply cost
,
apply origin
,
apply tag
.
Example
# Define an apply clause, setting to import the route to a level-2 area.
[Quidway-route-policy] apply isis level-2
