Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches
Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-30
OSPF Process 1 with Router ID 1.1.1.1
Virtual Links
Virtual-link Neighbor-id -> 2.2.2.2, State: Full
Cost: 0 State: Full Type: Virtual
Transit Area: 0.0.0.2
Timers: Hello 10, Dead 40, Poll 0, Retransmit 5, Transmit Delay 1
Table 3-15
Description of the fields of the
display ospf vlink
command
Field
Description
Virtual-link Neighbor-id
Router ID of virtual-link neighbor router
State State
Interface
IP address the interface on the virtual link
Cost
Route cost of the interface
Type
Type: virtual link
Transit Area
ID of transit area that the virtual link passes, and it
cannot be backbone area, Stub area and NSSA area
OSPF timers, defining as follows:
Hello
Interval of Hello packet
Dead
Interval of dead neighbors
Poll
Interval of poll
Timers
Retransmit
Interval for retransmitting LSA on the
interface
Transmit Delay
Delay time of transmitting LSA on the interface
3.1.28 filter-policy export
Syntax
filter-policy
{
acl-number
|
ip-prefix
ip-prefix-name
}
export
[
routing-protocol
]
undo
filter-policy
{
acl-number
|
ip-prefix ip-prefix-name
}
export
[
routing-protocol
]
View
OSPF view
Parameter
acl-number
: Number of a basic or advanced access control list.
ip-prefix-name:
Name of the address prefix list used for filtering the destination
addresses in routing information.
